|
This enclosure will convert an internal 3.5'' Standard IDE Hard Drive (80GB-400GB) to USB 2.0 and Firewire Port External RAID 1 (mirror) Storage/Back-UP Solution. It has built-in Power Supply and Ultra Quiet Cooling Fans.
U2FWATA525D-R1
USB 2.0 & FireWire (1394a) ComBo to ATA devices bay with RAID 1 controller
U2FWATA525D-R1 is a USB 2.0 & FireWire (1394a) ComBo to ATA devices bay with RAID 1 controller. U2FWATA525D-R1 is a reliable and cost effective solution for RAID 1 disk mirroring. By mirroring technique, U2FWATA525D-R1 Maintains data in two disk drivers simultaneously and securely. If one drive fails, U2FWATA525D-R1 automatically switches operations to the functional drive and alarms to alert the failure.
U2FWATA525D-R1 takes full advantage of high-speed USB 2.0, 1394 serial bus and Ultra DMA 133 ATA Bus allowing for multitasking performance. It allows ATA drives to be connected to either USB 2.0 or 1394 serial bus in a plug-and-play fashion.
U2FWATA525D-R1 allows users to easily hot-swap ATA drive without interrupting the current operation.
U2FWATA525D-R1 provides the perfect solution for data backup and transferring of data between computers using ATA devices.
FWBEIDE525D-R1 combines four key components:
1). USB 2.0 & FireWire (1394a) ComBo to ATA bridge board (U2FW-IDE02)
2). IDE-RAID-IDE Subsystem
3). ATA Mobile Rack
4).Case and Power supply
1). USB 2.0 & FireWire (1394a) ComBo to ATA bridge board (U2FW-IDE02)
USB 2.0 and FireWire (1394a) arbitration: Auto-Switch by detecting USB bus power.
DC Power Connector: with mini 4-pin Floppy Disk Drive power connector
ATA Interface: Male IDC 2X20 Connector
USB 2.0 Interface: One USB B-Type connector
USB Bus Transfer Rate: High Speed (480 Mbit) or Full Speed (12 Mbit)
USB Bus Power: Self Powered Mode Operation
Number of ports: External X 2 (FW-6pin)
1394a PHY: Ti's TSB41AB2 1394a-2000 400Mbps PHY
1394 Bus Transfer Rate: 100/200/400 Mbps
Complies with T13's ATA/ATAPI-6 Draft Specification:
USB 2.0 to ATA Native Bridge Controller:
- PIO Mode 0, 3, 4
- Ultra DMA Mode 2, 4
- Supports 48-bit addressing for large hard drives (>128GB).
FireWire (IEEE-1394) to ATA Native Bridge Controller:
- DMA Mode 0 ~ 2
- Ultra DMA Mode 2, 4, 5
- Supports 48-bit addressing for large hard drives (>128GB).
2). IDE-RAID-IDE Subsystem:
Support RAID level 1 (Disk Mirror)
Provide two IDE Connector for two 3.5" ATA HDD
Auto-Rebuild
Support up to UDMA 133/100/66/33
OS Independence, require no device driver
Hot-Swap Supported
Provides One RS-232 Port for RAID Management
3). ATA Mobile Rack
Inner HDD tray provide the screw hole for 3.5" ATA HDD.
Inner HDD tray and mounting frame were made by aluminum which is good for heat dissipation.
Ejecting pull handle with miniature keylock.
Keylock + Power Switch make the HDD Mobile Tray Hot-swappable
One Built-in 40x40 mm cooling fan.
Power indicator LED and HDD Access LED
Provide two kinds of HDD Mobile Tray:
- 3.5" IDE ATA HDD Mobile Tray (included)
- 3.5" Serial ATA HDD Mobile Tray (optional $40 each)
4). Case and Power supply:
Provide Power indicator LED and Disk Status LEDs
Provide Power Switch on the front panel
Built-in 80W power supply/Universal auto-switching 90-240V AC
Built-in 80x80 mm cooling fan
HARDWARE REQUIREMENTS
Desktop PC: with either a built-in FireWire (IEEE-1394) controller or a FireWire (IEEE-1394) to PCI Host Adapter equipped with a external FireWire (IEEE 1394) port.
Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
Laptop PC: with either a built-in FireWire (IEEE-1394) controller or a FireWire (IEEE-1394) to CardBus PC Card equipped with a external FireWire (IEEE 1394) port.
Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
OPERATING SYSTEMS REQUIREMENTS
Windows 98 SE/ME/2000/XP
Apple Mac OS 9.1 or later
KIT INCLUDED:
U2FWATA525D-R1 enclosure
AC Power Core (1.8m length)
6pin-to-6pin FireWire Cable (1.5m length).
A-to-B type USB 2.0 Cable (1.5m length).
D-sub 9pin male to D-sub 9pin female RS-232 cable in 1.0m length
Installation guide
1-YEAR WARRANTY
Important Technical Information:
PLEASE NOTE: THIS DEVICE REQUIRES TWO STANDARD IDE 3.5'' DRIVES, IT WILL DUPLICATE DATA WRITTEN TO DRIVES VIA HARDWARE RAID CONNTROLLER |
|
Low Profile PCI Single DB-9 Serial Adapter Card from $24.50
