USB 2.0 Adapter Converter for SATA HDD, conect any SATA Device to your USB 2.0 Port!

CHIPSET:NEC-720133, Jmicron-JM20330B2

USB 2.0 Adapter to any Native SATA 3.5' Drive from 80GB up to 500GB. Compatible with Windows ME/2000/XP/2003. Not for MAC!

Adapter plugs directly to your usb 2.0 port on a windows based computer and provides one SATA port (with short cable) to connect directly into your SATA 3.5' HDD. Uses NEC and Jmicron Chip for COnversion. Real Life Test Results show a 12.9 GB file folder with 237 Files transfered in less than 10 minutes. Tested with WD/Maxtor/Seagate/Hitachi SATA drives.

Package includes Adapter cable only, you will need to provide external power to your drive.

USB2.0 to serial ATA translation. It includes the NEC USB2.0 IDE bridge & Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 ,The AUS100 converter supports a SATA 1.5GHz data rate & USB2.0 480MHz data rate . The application layer supports both the ATA register command set and PACKET command set, which could drive SATA Hard Disk.

Dimension : 51 * 30 * 17 (mm)

Weight : 19g

With LED Indicated power

Power supply : USB port

need power : under 1W

Support Win-98se,Win-98me need driver

Support Win-2000,Win-xp free driver

Easy install & free driver

Max speed (Read + Write) : 52M Byte

USB2.0 Specification compliant

USB2.0 NEC newest chipset install

Serial ATA 1.0 Specification compliant

Automatic Serial ATA 1.5 Gbps speed negotiation

Support USB2.0 plug & play

Support Serial ATA hot-plug

Ultra low power consumption

Work for both AC and DC couple between the transmitter and the receiver

Provide specified OOB signal detection and transmission

Support Spread Spectrum Clocking to reduce EMI

Support Partial/Slumber power management

Provide adjustable TX signal amplitude and pre-emphasis level

SATA Disk Slave support

Speed :Win-98 .....Read >17 Mbyte , Write >14 Mbyte

Speed :Win-2000,xp .Read >27 Mbyte , Write >25 Mbyte

@

1

Convert USB2.0 to e-SATA interface

Furnish standard e-SATA port for external SATA device

Support Hot-Plug

USB 2.0 to eSATA Adapter

Converts any eSATA device or SATA device with converter cable to connect to any Notebook, Desktop, or Server with available USB 2.0 ports.

Connect eSATA device to high-speed USB 2.0 port

Connect SATA device to USB 2.0 port (requires optional

SATA to eSATA cable type "I" to "L")

Supports Hot-Swap & Plug-n-Play (Windows Me, 2000, XP, 2003 and Mac OS X and above)

Supports Software RAID feature in Windows and Mac OS X

Compact design with no extra power source required

Works on Notebooks and Desktops

RoHS Compliant

Important Technical Information: USB 2.0 to eSATA Adapter AC ADAPTER IS NOT PROVIDED, Please add note at checkout if you need External power for your drive $21.98 part number ACX-35SSA

Qty: